LED Lights

LED Lights
LED Lights

Sunday, January 23, 2011

Diagrams of Typical LED Par Lamps: Par30

Continuing with our last post "Diagrams of Typical LED Spotlights: GU10" regarding GU10 LED spotlights, in this post, we will talk about LED Par30 Lamps.

LED Par30 Lamps

LED Par30 Lamps

Traditional Par lamps are commonly used in stage ligting applications. Par lamps are used to illuminate the stages, with dynamic-changing light colour, they are common lighting fixtures on the stage. However, because of the high power consumption, Par lamps are now gradually being replaced by LED PAR lamps. LED Par Lamps are designed to replace traditional halogen Par lamps. 5W LED to replace 40W halogon, 7W LED to replace 50W halogen, 9W LED to replace 60W halogen, 12W to replace 75W halogen, 80-90% energy saving. See Fg. LED Par30 Lamps.

From the appearance point of view, LED Par lamps and traditional halogen Par lamps look very similar. However, in fact, the difference between them is tremendous.

Light Source: light source is the essential difference between LED Par lamps and halogen Par lamps, and that's the reason why LED lights are much more efficient than halogen lamps. halogen lamps generate light by heating tungsten that covered by halogen gas, while for LEDs, simply describing, when current goes through LEDs, compounded particles in P-N junctions will then release photons (energy). LEDs generate less heat when emitting light, that's the reason why LEDs are much more efficient than halogen lamps and incandescent bulbs.

LED Par30 Lamps

LED Par30 Lamps - Dimension

Materials: materials are different, LED Par lamps usually need aluminum heatsink for heat dissipation while halogen Par lamps do not - their lamp bodies are usually made of plastic.

Driver: furthermore, LED par lamps need drivers (or transformers) in order to be running in existing GU10 fittings, normally 110V or 240V high-voltage fittings.

The picture below illustrates a typical LED Par30 lamp's exploded view. The Par30 lamp is decomposed into 9 components as can be seen from the diagram. Following are the corresponding annotations.

LED Par30 Lamps

LED Par30 Lamps - Componencts

1. Cover
2. Lens: beam angle usually customizable
3. Holder
4. LEDs
5. MC PCB
6. Heatsink
7. Screw
8. Plug holder
9. Replacable plug: E26,E27

Copyrighted by: www.sielement.com

Image Source: ledcax.com

Wednesday, January 19, 2011

Various standard LED lampholders: E27, MR16, GU10, PAR

According to installation, lampholders are generally divided into bayonet-type and screw, etc. According to material, bakelite, lamp holders are made of plastic, metal, ceramics, etc. For example, E27 maybe the most commonly used screw lampholder for light bulbs. And the lampholders for fluorescent and energy-saving tubes are referred to as T8 and T5.

Some lampholders may require up to IP68 protection grading. Usually lampholder are required to meet IEC (International Electrotechnical Commission standard) security certification.

Lampholder Classification:

Typically, the name of a lampholder type is likely to be like this “letter(s) + number(s)”. A letter at the beginning often indicates the shape of the bulb, i.e. E for Edison, T for tubular, R for reflector.

E12, E14, E26, E27, E40 and other names with “E” at the begining are all Edison screw lampholders. Obviously, E represents Edison, the name of the great man who invented incandescent bulb. E27 is commonly used in residential lighting – incandescent light bulbs. E14 has a smaller size than E27, while E40 is larger than E27.

B22, with 2-pin screw, is another commonly used lampholder type for incandescent light bulbs.

GU lamps (e.g., GU10) is a daily use bayonet-type. GU: G type lamp holder, said plug-in, U said that U-shaped lamp part of the show, behind the numbers that light foot hole center distance (in “mm”) .

MR16, MR11 lamps. Begining with “MR”, followed by a number, this type of lamps are usually used as spot lighting for a small area. The lamps usually have two small pins. MR: Multiface Reflect, multi-faceted reflector (light cup), followed by numbers indicates the lamp cup diameter(unit is 1/8 inch). E.g., MR16′s diameter = 16 × 1/8 = 2 inches or = 50mm. The same calculation for MR11.

PAR lamps are generally PAR20 PAR30 PAR36 PAR46 PAR56, volume may be long or short, also known as down light, light beam, used to illuminate the stage, dynamic change color, are common fixtures on the stage, because the relatively large power consumption, but also grilled Feeling, now gradually being replaced by LED PAR lamps.Dimension is increasing as the number following “PAR” increases, i.e., PAR38 has a larger size than that of PAR30′s.

LED Light Bulbs E27
E27

LED Spotlights MR16
MR16

LED Spotlights GU10
GU10

LED Par Lamps
PAR Lamps



Copyrighted by: sielement.com

Awesome, LED Light Shoes!

Remember we posted an article about LED Light Underwear a few weeks ago. Now, some other cool stuff are found. This time, let’s check the LED light shoes out!

LED Light Shoes
LED Light Shoes
LED Light Shoes

 LED Light Shoes


Doesn’t it look cool? I can not wait to buy one, lol…

Incredible, seems the designers can use LED to create things beyond imagination. LED clothes, LED shoes, and next time, maybe LED light hair?

Originally posted by: sielement.com

Monday, January 17, 2011

Diagrams of Typical LED Spotlights: MR16

Continuing with our last post” Diagrams of Typical LED Spotlights: GU10” regarding GU10 LED  spotlights, in this post, we will talk about MR16 LED spotlights.

MR16 spotlights have been commonly used in spotlighting applications. Traditional MR16 spotlights are halogen lamps. Typically, under current light efficiency of LEDs, 3W LEDs is equivalent to 20W halogen lamps, and 5W or 6W LEDs is equivalent to 40W halogen lamps in terms of lux. Here the picture shows a 4*1W MR16 LED spotlights. See Fg. MR16 LED Spotlights.
LED Spotlights MR16
LED Spotlights MR16

From the appearance point of view,  MR16 LED spotlights and halogen spotlights look very similar. However, in fact, the difference between them is tremendous.
Light Source: light source is the essential difference between LED spotlights and halogen lamps, and that’s the reason why LED lights are much more efficient than halogen lamps. halogen lamps generate light by heating tungsten that covered by halogen gas, while for LEDs, simply describing, when current goes through LEDs, compounded particles in P-N junctions will then release photons (energy). LEDs generate less heat when emitting light, that’s the reason why LEDs are much more efficient than halogen lamps and incandescent bulbs.

LED Spotlights MR16
LED Spotlights MR16 - Dimension

Materials: materials are different, LED spotlights usually need aluminum heatsink for  heat dissipation while halogen spotlights do not – their lamp bodies are usually made of plastic.

Driver: furthermore, LED spotlights need drivers (or transformers) in order to be running in existing MR16 fittings, normally 110V or 240V high-voltage fittings.
The picture below illustrates a typical MR16 LED spotlight exploded view. The spotlight is decomposed into 7 components as can be seen from the diagram. The following are the corresponding annotations.

LED Spotlights MR16
LED Spotlights MR16 - Components
  1. Lens: beam angle usually customizable
  2. Screws
  3. LEDs
  4. MC PCB
  5. Heatsink
  6. Replacable plug: GU5.3,E26,E27,B22
More interesting stories about LED light bulbs,  will be posted soon, etc Par30.
Copyrighted by: www.sielement.com
Image Source: ledcax.com

City of Novato Testing LED Street Lights

It's reported that city of Novato is in the process of conducting a LED street light test to gain public feedback on its selection of energy-efficient lighting fixtures.
Four LED lighting fixtures have been installed between Rowland Boulevard and Adele Drive, and four induction fixtures were installed between Arthur Drive and Yukon Way.

All lights installed are expected to reduce monthly electricity costs by about 40% and also reduce routine maintenance costs three to four times that of the current fixtures.

Saturday, January 15, 2011

Taiwan LED Industry May Keep on Steady Growth in 2011

Taiwan Photonics Industry and Technology Development Association (PIDA) has recently predicted that the local LED industry will grow at a moderate pace in 2011.

According to PIDA , the output value of the global LED industry grew an increase of 68 percent from US$9 billion in 2009 to US$15.1 billion in 2010, and the number will further increase by 38 percent to US$20.8 billion in 2011.

Lu Shao-hsu, a PIDA analyst ,pointed out that Taiwan's output value of LED packaging and modules, which rose nearly 60 percent in 2010, is expected to increase only 24 percent in 2011 due to a higher base period comparison.

Deaphne Kuo, another PIDA analyst, also estimated that the global output value of large backlights, including applications for televisions and notebooks may approach US$7.3 billion in 2012 from an estimated US$2.98 billion in 2010.

Furthermore, based on technological improvements and the support of governments, LED lighting will become another factor driving the entire LED industry around the world, Kuo added.



Source: LEDinside

Creating atomic bomb mushroom cloud with LED lights – DIY

Can you imagine that you can creat atomic bomb mushroom cloud at home (complete DIY)? This article will show you how to achieve this. Tips: LED lights is the keyword.

LED Light Atomic Bomb Mmushroom Cloud 01
LED Light Atomic Bomb Mmushroom Cloud
In fact, anyone with physics knowledge of a junior high school level should be capable of coping that. Now let’s start learning the atomic bomb mushroom cloud tutorial, with the help of some simple instructions and demonstration graphics. Take some notes if nessary, then, after that, you can go home and make your own mushroom cloud with LED lights

Step 1: buy some cauliflower from the supermarket, get a glass jug (must be transparent) and cover the glass jug with split cauliflower completely from outside, until the glass jug can not be seen.

LED Light Atomic Bomb Mmushroom Cloud 02
Step 1
Step 2: Get enough cotton and a wire, bend the wire into a circle, then wrap the wire around with cotton.

LED Light Atomic Bomb Mmushroom Cloud 03
Step 2
Step 3: The most important but simple step – put a bright LED bulb which is connected to the power supply into to the glass jug.

Step 4: The most exciting step – turn the LED bulb on. Now you will see the spectacular mushroom cloud! Enjoy the end of the world brought by the home-made atomic bomb, 2012 is really close indeed.
LED Light Atomic Bomb Mmushroom Cloud 04
 
 
Translated by Sielement.com
 

Monday, January 10, 2011

Video: Shenzhen Underground LED Lights Project (1)



Short video shot in the underground in Shenzhen, Guangdong, China, demonstrating different lighting effect between fluorescent tubes and LED lights. Left: LED tubes; right: fluorescent tubes.

LED Lihgts: the ceiling looks darker, the wall looks darker, but the ground looks brighter.

Traditional fluorescent tubes: the ceiling looks darker, the wall looks brighter, but the ground looks darker.

Very good example to show LED lights are directional lighting. Hope you would enjoy this video.

Copyrighted: http://www.sielement.com

Saturday, January 8, 2011

LED lights market expected to compete more intensify with price dropping

The market estimated that Led lighting products' prices would drop by 15-20% each year amid increase competition in the market as vendors reduce prices to gain market share, which even be fall to one-third of current prices.

At first, the Japanese market appeared to price war in 2009. Sources from Led companies indicated that the price competition had extended to China, Europe and the US.

Some light bulb makers reportedly would introduce led lighting products at end-use price of US$10 in 2011, which would compete for pricing scheduled to enter the LED sector with distributors and retailers well-known, and the price battle would only intensify in the future.

City of Foley Considers Retrofitting LED Lights

It's reported that City of Foley is thinking about updating some new light throughout the city by experimenting with Led technology.

On Monday, Bravo Zulu, a technology company specializing in communications and monitoring technology have given a presentation focused on the benefits led light technology could have for the city, and ways the technology could be implemented to the city council.

According to Bravo Zulu , one of the main benefits of its LED technology is an included sensor system, which detects motion to turn the lights on when cars or people are nearby and dims the lights, using less power when no one is nearby.
So far, no decision has been made regarding the placement of LED lights in Foley, but the council is considering the possibility.